JS500 concrete mixer discharges 0.5m3 each time, which is the mixing host of HZS25 station, also known as 0.5m3 concrete mixer. It can mix semi dry, dry hard and plastic concrete, light aggregate concrete and various kinds of mortar. The machine adopts lifting device and mixing arm connection mode, which improves the reliability of the whole machine. It has four major performances: rapid material mixing, production efficiency, even mixing and quality. JS500 mixer can be used alone, also can be used as the main engine of mixing plant and mixing plant. It is suitable for general construction engineering, road, bridge engineering and small component factory. JS500 concrete mixer is a double horizontal shaft forced mixer. It has a single stand-alone operation and a simple concrete mixing station composed of PLD series batching machines. It can also provide a matching host for the mixing station and is widely used.
The brake motor drives the drum to rotate through the reducer, and the steel wire rope climbs up along the track of the loading rack through the pulley traction hopper. When it climbs to a certain height, a pair of rollers on the bucket door at the bottom of the hopper enter the horizontal fork of the feeding frame, the bucket door opens automatically, and the materials are put into the mixing tank through the feeding leakage hopper. In order to ensure the hopper in place accurately, a limit switch is installed on the feeding rack. There are two limit switches in the upper limit position, which have the function of lifting limit and safety protection respectively. There is only one limit switch in the lower limit. When the hopper is lowered to the bottom of the pit, the wire rope is slightly loose, the spring lever mechanism makes the lower limit move, and the winch mechanism stops automatically. The lower limit and spring lever mechanism are installed on the top of the upper guide rail. The upper part of the loading frame can be folded. It is connected by bolts and folded during transportation to reduce the transportation height.
1. The tank body is fixed with the frame, and the mixing shaft is no longer subject to the pressure of the material and tank body weight, thus prolonging the service life of the mixing shaft;
2. Electric open-door discharging is adopted to avoid the disadvantage of raw material remaining in rotating tank discharging;
3. Unloading is quick and clean;
It is convenient and time-saving in maintenance;
5. Good production efficiency.