1 after the work is finished, pump, additive pump, water tank, additional agent box, residual water and additives in the water and additive piping should be used to prevent damage to the pump and its pipelines, and to start the additional pump of the pump for 1-2 minutes.
2. clean up the ash inside and outside the mixing tank wall, the concrete at the discharge port, the mixing shaft and the discharge door, rinse the central water with water, and place it in a small amount of gravel and water for a few minutes. Wash car, add agent box and its supply system with water.
3. the smooth points are located at the outlet shaft of the mixer, the storage hopper and the weighing Doumen axle, the belt conveyor, the supporting wheel, the roller, the roller, the bearing, the transmission chain, the spiral shaft, the lower bearing and the main gear.
4. check the wear condition of blade, scraper and stirring arm to adjust the gap or change; whether there is any loosening phenomenon between the bolts of the vibrator; check the contactors in the electrical appliances; whether the static and dynamic contacts of the intermediate relay can be damaged or burned.